Amazon PAS-C01 Dumps

Question # 1

A company is migrating its SAP workloads to AWS The company's IT team installs a highly available SAP S.4HANA system that uses the SAP HANA system replication cluster package on SUSE Linux Enterprise Server The IT team deploys the system by using cluster nodes m different Availability Zones within the same AWS Region.   After the initial launch of the SAP application the application is accessible However after failover the IT team cannot access the application even though the system is up and running on the secondary node After investigation an SAP solutions architect discovers that the virtual IP address has not been used correctly   Which combination of steps should the SAP solutions architect take to resolve this problem? (Select TWO.)

A. Use an overlay IP address as a secondary IP address with the primary node of the cluster   
B. Choose an overlay IP address within the VPC CiDR block that corresponds with the secondary node of the cluster   
C. Use an overlay IP address as a virtual IP address   
D.      Choose an overlay IP address within the VPC CIDR block that corresponds with the primary node of the cluster   
E. Choose an overlay IP address outside the VPC CiDR block that hosts the application and the database  

Show Answer

Question # 2

A company wants to improve the RPO and RTO for its SAP disaster recovery (DR) solution by running the DR solution on AWS The company is running SAP ERP Central Component (SAP ECO on SAP HANA The company has set an RPO of 15 minutes and an RTO of 4 hours.   The production SAP HANA database is running on a physical appliance that has x86 architecture. The appliance has 1 TB of memory and the SAP HANA global allocation limit is set to 768 GB. The SAP application servers are running as VMs on VMware and they store data on an NFS file system The company does not want to change any existing SAP HANA parameters that are related to data and log backup for its on-premises systems.   What should an SAP solutions architect do to meet the DR objectives MOST cost-effectively?   

A. For the SAP HANA database change the log backup frequency to 5 minutes Move the data and log backups to Amazon S3 by using the AWS CLI or AWS DataSync   Launch the SAP HANA database For the SAP application servers, export the VMs as AMis by using the VM import/Export feature from AWS For NFS file shares/sapmnt and usr-sap/trans/ establish real-time synchronization from DataSync to Amazon Elastic File System (Amazon EFS)
B. For the SAP HANA database change the log backup frequency to 5 minutes Move the data and log backups to Amazon S3 by using AWS Storage Gateway File Gateway For the SAP application servers export the VMs as AMIs by using the VM Import'Export feature from AWS For NFS file shares /sapmnt and 'usr saplrans establish realtime synchronization from AWS DataSync to Amazon Elastic Foe System (Amazon EFS)   
C. For the SAP HANA database SAP application servers and NFS Me shares use CloudEndure Disaster Recovery to replicate the data continuously from on premises to AWS Use CloudEndure Disaster Recovery to launch target instances in the event of a disaster   
D. For the SAP HANA database use a smaller SAP certified Amazon EC2 instance Use SAP HANA system replication with ASYNC replication mode to replicate the data continuously from on premises to AWS For the SAP application servers use CloudEndure Disaster Recovery for continuous data replication For NFS file shares sapmnt and .'uv-sap'trans. establish real-time synchronization from AWS DataSync to Amazon Elastic File System (Amazon EFS)  

Show Answer

Question # 3

A company wants 10 migrate its SAP ERP landscape to AWS The company will use a highly available distributed deployment for the new architecture Clients will access SAP systems from a local data center through an AWS Site-to-Site VPN connection that is already in place An SAP solutions architect needs to design the network access to the SAP production environment   Which configuration approaches will meet these requirements? (Select TWO.)  

A. For the ASCS instance configure an overlay IP address that is within the production VPC ClDR range Create an AWS Transit Gateway Attach me VPN to the transit gateway Use the transit gateway to route the communications between the local data center and the production VPC Create a static route on the production VPC to route traffic that is directed to the overlay IP address to the ASCS instance   
B. For the ASCS instance configure an overlay IP address that is outside the production VPC ClDR range Create an AWS Transit Gateway Attach the VPN to the transit gateway Use the transit gateway to route the communications between the local data center and the production VPC Create a static route on the production VPC to route traffic that is directed to the overlay IP address to the ASCS instance   
C. For the ASCS instance configure an overlay IP address that is within the production VPC ClDR range Create a target group that points to the overlay IP address Create a Network Load Balancer and register the target group Create a static route on the production VPC to route traffic that is directed to the overlay IP address to the ASCS instance   
D. For the ASCS instance configure an overlay IP address that is outside the production VPC ClDR range Create a target group that points to the overlay IP address   Create a Network Load Balancer, and register the target group Create a static route on the production VPC to route traffic that is directed to the overlay IP address to the ASCS instance   
E. For the ASCS instance configure an overlay IP address that is outside the production VPC ClDR range Create a target group that points to the overlay IP address   Create an Application Load Balancer and register the target group Create a static route on the production VPC to route traffic that is directed to the overlay IP address to the ASCS instance.  

Show Answer

Question # 4

A company wants to migrate its on-premises servers to AWS. These servers include SAP ERP Central Component (SAP ECC) on Oracle Database. The company is running SAP ECC application servers and Oracle Database servers on AIX. The company must migrate the SAP workloads to AWS with minimal changes.   Which solution will meet these requirements?   

A. Perform a heterogeneous migration for SAP on AWS Specify the SAP ECC application servers to run on SUSE Linux Enterprise Server Specify Oracle Database to run on Oracle Enterprise Linux on a Dedicated Host   
B. Perform a homogeneous migration for SAP on AWS Specify the SAP ECC application servers and Oracle Database to run on AIX   
C. Perform a heterogeneous migration for SAP on AWS Specify the SAP ECC application servers and Oracle Database to run on Oracle Enterprise Linux.   
D. Perform a heterogeneous migration for SAP on AWS Specify the SAP ECC application servers and Oracle Database to run on Windows.  

Show Answer

Question # 5

An SAP solutions architect is using AWS Systems Manager Distributor to install the AWS Data Provider for SAP on production SAP application servers and SAP HANA database servers The SAP application servers and the SAP HANA database servers are running on Red Hat Enterprise Linux.   The SAP solutions architect chooses instances manually m Systems Manager Distributor and schedules installation. The installation fails with an access and authorization error related to Amazon CloudWatch and Amazon EC2 instances. There is no error related to AWS connectivity.   What should the SAP solutions architect do to resolve the error?

A. Install the CloudWatch agent on the servers before installing the AWS Data Provider tor SAP   
B. Download the AWS Data Provider for SAP installation package from AWS Marketplace Use an operating system super user to install the agent manually or through a script   
C. Create an IAM role Attach the appropriate policy to the role Attach the role to the appropriate EC2 instances   
D. Wait until Systems Manager Agent is fully installed and ready to use on the EC2 instances Use Systems Manager Patch Manager to perform the installation  

Show Answer

Question # 6

A company is running an SAP HANA database on AWS The company is running AWS Backint Agent for SAP HANA(AWS Backint agent) on an Amazon EC2 instance AWS Back agent is configured to back up to an Amazon S3 bucket The backups are failing with an AccessDeniod error m the AWS Backint agent log file.   What should an SAP basis administrator do to resolve this error?   

A. Assign execute permissions at the operating system level for the AWS Backint agent binary and for AWS Backint agent   
B. Assign an 1AM role to an EC2 instance Attach a policy to the IAM role to grant access to the target S3 bucket   
C. Assign the correct Region ID for the S3BucketAwsRegion parameter in AWS Backint agent for the SAP HANA configuration file   
D.      Assign the value for the Enable Tagging parameter in AWS Backint agent for the SAP HANA configuration file  

Show Answer

Question # 7

A company is moving to the AWS Cloud gradually. The company has multiple SAP landscapes on VMware The company already has sandbox development and QA systems on AWS The company's production system is still running on premises. The company has 2 months to cut over the entre landscape to the AWS Cloud   The company has adopted a hybrid architecture for the next 2 months and needs to synchronize its shared file systems between the landscapes These shared file systems include trans directory mounts, /software directory mounts, and third-party integration mounts in the on-premises landscape the company has NFS mounts between the servers On the AWS infrastructure side the company is using Amazon Elastic File System (Amazon EFS) to share the common files   An SAP solutions architect needs to design a solution to schedule transfer of these shared files bidirectional^ four times each day. The data transfer must be encrypted   Which solution will meet these requirements?

A. Write an rsync script Schedule the script through cron for four times each day in the on-premises VMware servers to transfer the data from on premises to AWS   
B. Install an AWS DataSync agent on the on-premises VMware platform Use the DataSync endpoint to synchronize between the on-premises NFS server and Amazon EFS on AWS   
C. Order an AWS Snowcone device Use the Snowcone device to transfer data between the on-premises servers and AWS   
D. Set up a separate AWS Direct Connect connection for synchronization between the on-premises servers and AWS  

Show Answer

Question # 8

A company plans to migrate its SAP NetWeaver deployment to AWS. The deployment runs on a Microsoft SQL Server database. The company plans to change the source database from SQL Server to SAP HANA as part of this process.   Which migration tools or methods should an SAP solutions architect use to meet these requirements'' (Select TWO. )  

 A. SAP HANA classical migration  
 B. SAP HANA system replication   
C. SAP Software Update Manager (SUM) Database Migration Option (DMO) with System Move   
D. SAP HANA backup and restore   
E. SAP homogeneous system copy  

Show Answer

Question # 9

A company has an SAP Business One system that runs on SUSE Linux Enterprise Server 12 SP3. The company wants to migrate the system to AWS An SAP solutions architect selects a homogeneous migration strategy that uses AWS Application Migration Service (CloudEndure Migration)   After the server migration process is finished the SAP solutions architect launches an Amazon EC2 test instance from the R5 instance family. After a few minutes the EC2 console reports that the test instance has failed an instance status check Network connections to the instance are refused   How can the SAP solutions architect solve this problem?

A. Reboot the instance to initiate instance migration to another host   
B. Request an instance limit increase for the AWS Region where the test instance is being launched   
C. Create a ticket for AWS Support that documents the test server instance ID Wait for AWS to update the host of the R5 instance   
D. Install the missing drivers on the source system Wait for the completion of migration synchronization Launch the test instance again  

Show Answer

Question # 10

A company is implementing SAP HANA on AWS According 10 the company's security policy SAP backups must be encrypted Only authorized team members can have the ability to decrypt the SAP backups   What is the MOST operationally efficient solution that meets these requirements?   

A. Configure AWS Backint Agent for SAP HANA to create SAP backups in an Amazon S3 bucket After a backup is created encrypt the backup by using client-side encryption Share the encryption key with authorized team members only   
B. Configure AWS Backint Agent for SAP HANA to use AWS Key Management Service (AWS KMS) for SAP backups Create a key policy to grant decryption permission to authorized team members only   
C. Configure AWS Storage Gateway to transfer SAP backups from a file system to an Amazon S3 bucket Use an S3 bucket policy to grant decryption permission to authorized team members only   
D. Configure AWS Backint Agent for SAP HANA to use AWS Key Management Service (AWS KMS) for SAP backups Grant object ACL decryption permission to authorized team members only  

Show Answer

Question # 11

A company is using SAP NetWeaver with Java on AWS The company has updated its generation of Amazon EC2 instances to the most recent generation of EC2 instances When the company tries to start SAP the startup fails The tog indicates that the SAP license expired Of is not valid.   What is the reason for this issue?   

A. The instance ID changed as part of the EC2 generation change   
B. The instance's hypervisor changed from Xen to Nitro   
C. The SAP Java Virtual Machine (SAP JVM) is not compatible with the new instance type   
D. An EC2 generation change is not supported for SAP Java-based systems  

Show Answer

Question # 12

A company has an SAP environment that runs on AWS. The company wants to enhance security by restricting Amazon EC2 Instance Metadata Service (IMDS) to IMDSv2 only. The company's current configuration option supports both iMDSvi and iM0Sv2. The security enhancement must not create an SAP outage.   What should the company do before it applies the security enhancement on EC2 instances that are running the SAP environment?  

 A. Ensure that the SAP kernel versions are 7 45 or later   
B. Ensure that the EC2 instances are Nitro based   
C. Ensure that the AWS Data Provider for SAP is installed on each EC2 instance
D. Stop the EC2 instances  

Show Answer

Question # 13

A company wants to migrate its SAP S/4HANA software from on premises to AWS in a few weeks An SAP solutions architect plans to use AWS Launch Wizard for SAP to automate me SAP deployment on AWS   Which combination of steps must the SAP solutions architect take to use Launch Wizard to meet these requirements? (Select TWO.)  

 A. Download the SAP software files from the SAP Support Portal Upload the SAP software files to Amazon S3 Provide the S3 bucket path as an input to Launch Wizard   
B. Provide the SAP S-user ID and password as inputs to Launch Wizard to download the software automatically.   
C. Format the S3 Tile path syntax according to the Launch Wizard deployment recommendation   
D. Use an AWS CloudFormation template for the automated deployment of the SAP landscape   
E. Provision Amazon EC2 instances Tag the instances to install SAP S'4HANA on them  

Show Answer

Question # 14

A company runs its SAP ERP 6 0 EHP 8 system on SAP HANAon AWS The system is deployed on an r4 I6xlarge Amazon EC2 instance with default tenancy. The company needs to migrate the SAP HANA database to an x2gd/.6xiarge High Memory instance After an operations engineer changes the instance type and starts the instance the AWS Management Console shows a failed instance status check   What is the cause of this problem?

A. The operations engineer missed the network configuration step during the post-migration activities   
B. The operations engineer missed the Amazon CloudWatch configuration step during the post-migration activities.   
C. The operations engineer did not install Elastic Network Adapter (ENA) drivers before changing the instance type   
D. The operations engineer did not create a new AMI from the original instance and did not launch a new instance with dedicated tenancy from the AMI  

Show Answer

Question # 15

A company is using a multi-account strategy for SAP HANA and SAP BW 4HANA instances across development QA and production systems m the same AWS Region Each system is hosted m its own VPC The company needs to establish cross-VPC communication between the SAP systems.   The company might add more SAP systems m the future. The company must create connectivity across the SAP systems and hundreds of AWS accounts. The solution must maximize scalability and reliability.   Which solution will meet these requirements?   

A. Create an AWS Transit Gateway in a central networking account Attach the transit gateway to the AWS accounts Set up routing and a network ACL to establish communication   
B. Set up VPC peering between the accounts Configure routing in each VPC to use the VPC peering links   
C. Create a transit VPC that uses the hub-and-spoke model set up routing to use the transit VPC for communication between the SAP systems   
D. Create a VPC link for each SAP system Use the VPC links to connect the SAP systems  

Show Answer

Question # 16

A global retail company is running its SAP landscape on AWS Recently the company made changes to its SAP Web Dispatcher architecture The company added an additional SAP Web Dispatcher for high availability with an Application Load Balancer (ALB) to balance the load between the two SAP Web Dispatchers   When users try to access SAP through the ALB the system is reachable However the SAP backend system is showing an error message An investigation reveals that the issue is related to SAP session handling and distribution of requests . The company confirmed that the system was working as expected with one SAP Web Dispatcher. The company replicated the configuration of that SAP Web Dispatcher to the new SAP Web Dispatcher   How can the company resolve the error?

A. Maintain persistence by using session cookies Enable session stickiness (session affinity) on the SAP Web Dispatchers by setting the wdisp/HTTP/esid_support parameter to True   
B. Maintain persistence by using session cookies Enable session stickiness (session affinity) on the ALB   
C. Turn on host-based routing on the ALB to route traffic between the SAP Web Dispatchers   
D. Turn on URL-based routing on the ALB to route traffic to the application based on URL  

Show Answer

Question # 17

A company is planning to move to AWS. The company wants to set up sandbox and test environments on AWS to perform proofs of concept (POCs) Development and production environments will remain on premises until the POCs are completed.   At the company's on-premises location SAProuter is installed on the same server as SAP Solution Manager. The company uses SAP Solution Manager to monitor the entire landscape The company uses SAP router to connect to SAP Support The on-premises SAP Solution Manager instance must monitor the performance and server metrics of the newly created POC systems on AWS. The existing SAP router must be able to report any issues to SAP   What should an SAP solutions architect do to set up this hybrid infrastructure MOST cost-effectively''

A. Install a new SAP Solution Manager instance and a new SAP router instance m the AWS environment Connect the POC systems to these new instances Use these new instances m parallel with the on-premises SAP Solution Manager instance and the on-premises SAP router instance   
B. Install a new SAP Solution Manager instance and a new SAP router instance in the AWS environment install the Amazon CloudWatch agent on all on-premises instances Push the monitoring data to the new SAP Solution Manager instance Connect ail on-premises systems and POC systems on AWS to the new SAP Solution Manager instance and the new SAP router instance Remove the on-premises SAP Solution Manager instance and the on-premises SAP router instance Use the new instances on AWS   
C. Use AWS Site-to-Site VPN to connect the on-premises network to the AWS environment Connect the POC systems on AWS to the on-premises SAP Solution Manager instance and the on-premises SAP router instance   
D. Add the POC systems on AWS to the existing SAP Transport Management System that is configured m the on-premises SAP systems  

Show Answer

Question # 18

A company is running SAP ERP Central Component (SAP ECC) with a Microsoft SQL Server database on AWS A solutions architect must attach an additional 1 TB Amazon Elastic Block Store (Amazon EBS) volume. The company needs to write the SQL Server database backups to this EBS volume before moving the database backups to Amazon S3 for long-term storage.   Which EBS volume type will meet these requirements MOST cost-effectively?  

 A. Throughput Optimized HDD (st1)
B. Provisioned IOPS SSD (io3)   
C. General Purpose SSD (gp3)   
D. Cold HDD (sc1)  

Show Answer

Question # 19

A company uses an SAP application that runs batch jobs that ate performance sensitive. The batch jobs can be restarted safely The SAP application has sot application servers. The SAP application functions reliability as long as the SAP application availability remains greater than 60%. The company wants to migrate the SAP application to AWS. The company is using a duster with two Availability Zones   How should the company distribute the SAP application servers to maintain system reliability?   

A. Distribute the SAP application servers equally across three partition placement groups   
B. Distribute the SAP application servers equally across three Availability Zones   
C. Distribute the SAP application servers equally across two Availability Zones   
D. Create an Amazon EC2 Auto Scaling group across two Availability Zones Set a minimum capacity value of 4.  

Show Answer

Question # 20

A company that has SAP workloads on premises plans to migrate an SAP environment to AWS. The company is new to AWS and has no poor setup. The company has the following requirements   - The application server and database server must be placed in isolated network configurations   •   SAP systems must be accessible to the on-premises end users over the internet   •   The cost of communications between the application server and the database server must be minimized Which combination of steps should an SAP solutions architect take to meet these requirements? (Select TWO.)

  A. Set up an AWS Site-to-Site VPN connection between the company's on-premises network and AWS   
B. Separate the application server and the database server by using different VPCs   
C. Separate the application server and the database server by using different subnets and network security groups within the same VPC   
D. Set up an AWS Direct Connect connection with a private VIF between the company's on-premises network and AWS  

Show Answer