Citrix 1Y0-311 Dumps

Question # 1

Scenario: A Citrix Engineer is managing a XenApp and XenDesktop environment that has been built with thefollowing site architecture:Site A has been created in datacenter A.Site B has been created in datacenter B.A NetScaler Gateway has been set up in each datacenter. Each Gateway has access to both Sites.The StoreFront server group in each Site is configured to enumerate resources from both Sites.Application D is available in Site B only.Optimal Gateway Routing has been configured so that the published resources in each Site are mapped to thelocal Gateway.A user located near datacenter A logs in through NetScaler Gateway and attempts to launch Application B.Which behavior is expected in this scenario?

A. Resource enumeration occurs via Gateway A; the HDX connection is established using Gateway
B. Resource enumeration and the HDX connection are established using gateway A.
C. Resource enumeration and the HDX connection are established using Gateway B.
D. Resource enumeration occurs via Gateway B; the HDX connection is established using Gateway

Show Answer

Question # 2

Scenario: A Citrix Engineer needs to configure a baseline Citrix policy for a new user group in the XenApp and XenDesktop environment. The users are connecting from branch offices over a WAN connection. The NetScaler SD-WANs are supporting each of the WAN connections. The users are connecting to Windows Server 2012 R2 published desktops. The primary objective of the policies is to utilize the WAN link bandwidth as optimally as possible. Which two Citrix policy templates should the engineer use to accomplish this scenario? (Choose two.)

A. High Server Scalability
B. Optimized for CloudBridge
C. Optimized for WAN-Legacy OS
D. Optimized for WAN
E. High Server Scalability-Legacy OS

Show Answer

Question # 3

After an administrator restarts a XenApp server, the XenApp Administrator notices that the IMA Service is NOT starting. Which two components could be causing the issue? (Choose two.)

A. RPC Service
B. Local host cache
C. Citrix Streaming Service
D. Remote Desktop Service

Show Answer

Question # 4

Scenario: A Citrix Engineer is managing a XenApp and XenDesktop environment that has been built with thefollowing site architecture:-Site A was created in datacenterSite B was created in datacenter-A NetScaler Gateway is set up in each datacenter. Each Gateway has access to both Sites.-The StoreFront server group in each Site is configured to enumerate resources from both Sites.-Application A is available in Site A only.-Optimal Gateway Routing has NOT been configured.A user located near datacenter B logs in through NetScaler and attempts to launch Application A.Which behavior is expected in this scenario?

A. Resource enumeration and the HDX connection are established using Gateway.
B. Resource enumeration occurs through Gateway A; the HDX connection is established using Gateway
C. Resource enumeration occurs through Gateway B; the HDX is established using Gateway
D. Resource enumeration and the HDX connection are established using Gateway

Show Answer

Question # 5

What are two benefits of creating multiple Store locations on storage allocated to individual Provisioning Services servers? (Choose two.)

A. It does NOT require vDisk files to be replicated.
B. It minimizes the storage requirement for vDisks.
C. It provides redundancy without further configuration.
D. It requires fewer configuration steps than does centralized Store locations.
E. It is simple to maintain at scale due to its distributed nature.

Show Answer

Question # 6

What occurs after a Provisioning Services target device downloads or otherwise accesses the bootstrap file? 

A. Steady-state streaming
B. The login process
C. IP acquisition
D. Single-Read mode

Show Answer

Question # 7

Scenario: A Citrix Engineer configured a Provisioning Services server to use 30 streaming ports and 8 threads per port. The engineer allocated 8 vCPUS and 64GB of RAM to the server. Two Desktop OS vDisks are in the environment, each with 30GB of disk space. Which configuration should the engineer perform to enable the Provisioning Services server to support 500 concurrent target device streams? 

A. More threads per port should be assigned to the Provisioning Services server.
B. More ports should be assigned to the Provisioning Services server.
C. More CPUs should be added to the Provisioning Services server.
D. More RAM should be added to the Provisioning Services server.

Show Answer

Question # 8

Scenario: A Citrix Engineer is designing a Provisioning Services environment based on the following environmental factors: All target devices are part of a single subnet. The subnet is shared with other non-Provisioning Services machines which rely on starting up over the network. Microsoft-based supporting infrastructure is available on the subnet. The fewest number of steps are required for implementation. Which Provisioning Services startup method is appropriate for the target devices?

A. BIOS Embedded
B. BDM ISO
C. PXE
D. DHCP Options

Show Answer

Question # 9

Scenario: A Citrix Engineer is managing a Provisioning Services environment. The day after a new vDisk version is rolled out to production, multiple users report issues with one of the core applications hosted on the vDisk image. The administrator wants to roll back the new change and allow the target devices to stream from a functioning vDisk as soon as possible. How can the engineer accomplish this in the least amount of time? 

A. Perform a vDisk merge to consolidated differencing disk, then restart the target devices.
B. Copy an older version of the vDisk from the backup storage location, then reassign all the target devices to the imported vDisk and restart them.
C. Revert the vDisk version to Maintenance or Test mode, then restart the target devices.
D. Create a new version of the vDisk and reinstall the application, then restart the target devices.

Show Answer

Question # 10

Scenario: The XenApp farm consists of two zones, each located in a different datacenter. After some recent maintenance by the network team, the administrator discovers that the load balancing across the datacenters is NOT working. The most likely cause for the load balancing issue is that the firewall has started blocking the __________. (Complete the sentence with the correct option.)

A. IMA traffic between the datacenters.
B. XML traffic between the datacenters.
C. data store traffic between the datacenters.
D. Session Reliability traffic between the datacenters.

Show Answer

Question # 11

Users in a XenApp and XenDesktop environment need to access training videos, but for security reasons the video file data should never be accessible to the endpoints. Which multimedia rendering options should a Citrix configure to meet these requirements? 

A. Server fetching and server rendering
B. Media content blocked
C. Client fetching and client rendering
D. Server fetching and client rendering

Show Answer

Question # 12

Scenario: A Citrix Engineer recently implemented Workspace Environment Management (WEM) into an existing XenDesktop infrastructure to include deploying the Agent Host on several Virtual Delivery Agent (VDA) machines. The engineer created two WEM Sites (Site A and Site B) with various global settings set for the users of each site. Upon rolling out the new WEM infrastructure to production the engineer noticed that users from SiteB were NOT receiving their global settings within the sessions. What could be the cause of this issue? 

A. Some of the Agent Hosts were NOT configured to point to the Broker Service in Site.
B. the Agent port setting was NOT configured using GPO.
C. The Management Agent Host Configuration ADMX template was NOT imported to all VDAs.
D. A Windows firewall rule on the Infrastructure Services server is blocking the port required to communicate with Site.

Show Answer

Question # 13

Scenario: All users connect from thin clients to a XenApp hosted desktop. Recently, the Order Entry team has been printing all documents in color. A session printers policy has been created and applied to this user group. How can the XenApp Administrator ensure that these printers default to a setting of monochrome?

A. Modify the Printer Properties Retention Policy.
B. Change the universal driver preference policy to default to PCL4.
C. Modify the existing session printing policy with the required printer settings.
D. Adjust the Citrix Universal Printer default settings in the registry of the XenApp servers.

Show Answer

Question # 14

Scenario: A Citrix Engineer is managing an existing XenDesktop and Workspace Environment Management (WEM) infrastructure. The engineer performed recent benchmarks on all the user applications. As a result of this investigation, the engineer sees that a small number of user applications are experiencing random high CPU spikes, causing overall performance degradation within user sessions. Which step can the engineer take to improve the overall performance within the user sessions? 

A. Enable CPU Usage Limit and Idle Priority Time
B. Enable CPU Usage Limit and Exclude Specified Processes
C. Enable CPU Usage Limit and Intelligent CPU Optimization
D. Enable Process Affinity and Exclude Specified Processes

Show Answer

Question # 15

Which cache location should the engineer select of high availability and slow network performance are concerns in an environment?

A. Cache on Provisioning Services server shared storage
B. Cache in device RAM
C. Cache on device hard disk located in shared storage
D. Cache in device RAM with overflow on local hard disk

Show Answer

Question # 16

Scenario: A Citrix Engineer needs to complete the installation and setup of a new Citrix Workspace Environment Management (WEM) infrastructure. As one of the final steps, the engineer needs to point the Administration Console to the existing Citrix Licensing Server. Which step should the engineer take to complete this task

A. Select the ‘Home’ tab in the Administration Console ribbon, click ‘Configure License server’ and then enter the Citrix License Server details in the License server name field.
B. No steps are necessary as Licensing is configured during the installation and setup process.
C. Select the ‘Home’ tab in the Administration Console ribbon, click ‘Advanced Settings’ and then enter the Citrix License Server details in the License server name field.
D. Select the ‘About’ tab in the Administration Console ribbon, click ‘Configure License server’, and then enter the Citrix License Server details in the License server name field.

Show Answer

Question # 17

Why is it important to update agent-based anti-virus frequently when App Layering is used? 

A. So that the definitions file does NOT become outdated or self-initiate updates.
B. To improve startup time.
C. To avoid updating individual application layers.
D. So that it is NOT necessary to grant administrative rights to users.

Show Answer

Question # 18

Scenario: A Citrix Engineer needs to implement Workspace Environment Management (WEM) into an existing XenDesktop infrastructure. The current infrastructure utilizes a large number of Active Directory (AD) object configurations to manage user and group settings. The engineer first needs to review the current AD infrastructure for any identical configurations and settings that may cause conflicts with WEM. Which two specific pre-existing objects should the engineer review? (Choose two.) 

A. AD Logon Scripts
B. AD Domain Trusts
C. AD Group Policy Settings
D. AD Sites and Services

Show Answer

Question # 19

Ensure HDX sessions are launched in the zone that is closest to user data, if possible. If the preferred zone for the user is unavailable, launch the session in an alternative zone. Which zone preference setting can the Citrix Engineer use to accomplish these objectives? 

A. App Home
B. User Home
C. User Location
D. Mandatory User Home Zone

Show Answer

Question # 20

Scenario: A Citrix Engineer maintains a multi-zone XenDesktop infrastructure with two Virtual Delivery Agent (VDA) machines located in the Primary Zone and two VDAs in the Satellite Zone. Each zone contains a single Delivery Controller. During an unexpected outage, the Delivery Controller in the Primary Zone went offline and did NOT resume. What will happen to the VDAs in the Primary Zone?

A. The VDAs in the Primary Zone will attempt to register with the Delivery Controller in the Satellite Zone.
B. The VDAs in the Primary Zone will make intermittent attempts to re-register with the Delivery Controller in the Primary Zone.
C. The VDAs in the Primary Zone will remain in a registered state, regardless of the Delivery Controller being offline.
D. The VDAs in the Primary Zone will go to an unreg

Show Answer